How to Apply an External Calibration Curve to a Results Table in MultiQuant™ Software


Date: 11/05/2020
Categories: MultiQuant Software

0 Votes
   Print    Rate Article:

For research use only. Not for use in diagnostic procedures.


Answer

In MultiQuant™ software, a previously-created calibration curve can be imported into a results table and applied to the existing unknown samples. In the old results table with the calibration curve that you would like to export, ensure the standard samples are present and select the Process menu. Then select Export Calibration, name the calibration curve data, and click Save.

To apply the exported calibration to unknown concentration samples, create a new results table with unknown samples. Import the calibration curve by selecting Import External Calibration from the Process menu. Choose the recently exported calibration file and select Open.

If the same analyte names are used in the new results table as in the exported calibration, the assignment of external calibration dialog is completed automatically.