| Date: | 05/03/2022 |
| Categories: | SCIEX OS |
For research use only. Not for use in diagnostic procedures.
Answer
To create a hardware profile in simulation mode in SCIEX OS software, follow these steps:
1. Select the Configuration tile.
2. Select the Devices menu and then select the Add button in the upper right hand corner.
3. Choose the device from the Type and Model drop-down menus.
4. Click Settings and select Simulate Device.
5. Choose the appropriate instrument model to simulate.
6. Click Test device and Save.
7. Select the device and click Activate.
Posted: now